What You Need to Know Before Installing
The Pelican Camera Lens Protector for iPhone 14 Pro and 14 Pro Max is designed to shield your camera lenses from scratches and cracks. It uses durable double-tempered glass with anti-fingerprint and anti-scratch coatings to help keep images clear. Before you start, ensure your phone is an iPhone 14 Pro or 14 Pro Max, as the protector is engineered specifically for these models. The product comes in an Aluminum finish, and no other color variants are listed in the available information.
Pelican Camera Lens Protector Key Features
- Pelican Camera Lens Protector (Black) - iPhone 14 Pro / 14 Pro Max: Engineered for every day— the Pelican Aluminum Ring Lens Protector features durable double-tempered glass to shield your camera from scratches and cracks with anti-fingerprint and anti-scratch coatings to get clearer images. These features directly support the protector's core purpose: protecting your iPhone 14 Pro camera without compromising photo quality. The double-tempered glass provides impact resistance, while the coatings reduce smudges and scratches.

Pelican Camera Lens Protector (Black) - iPhone 14 Pro / 14 Pro Max
Installation Steps for the Pelican Lens Protector
The following steps are based on the product's general design and the supplied information. The manufacturer's instructions may include additional details not present here. Work in a clean, well-lit area to minimize dust.
- Clean the camera lenses and surrounding area: Use a microfiber cloth to remove dust, fingerprints, or smudges from the camera lenses. For stubborn particles, use the included alcohol wipe (if provided) and dry thoroughly. Any debris left under the protector can cause bubbles or reduced clarity.
- Peel the backing from the adhesive side: Carefully remove the protective film from the adhesive layer of the Pelican lens protector. Avoid touching the adhesive with your fingers to prevent oil transfer.
- Align the protector over the camera module: Position the protector so it fits exactly over the camera lenses of your iPhone 14 Pro or 14 Pro Max. The aluminum ring should sit flush with the edges of the camera bump. Check alignment before pressing down.
- Press firmly and evenly: Once aligned, press down on the protector starting from the center and moving outward. This helps push out any trapped air bubbles. Apply gentle, even pressure for a few seconds.
- Remove the top film and inspect: Peel off the outermost protective film (if present) from the lens protector. Inspect the installation for dust or bubbles. If bubbles remain, lift the protector slightly and re-press, or use a card to push them toward the edge.
What the Supplied Information Does Not Confirm
The product record does not include specific installation instructions, such as recommended drying times for adhesive or whether the protector is reusable after removal. The available information also does not confirm the exact thickness of the glass or whether the protector affects the use of third-party cases. For the best experience, follow any included manufacturer guide and handle the protector carefully during installation.

